林咏翔

1.实现3C需求的延长回圈寿命，经测试100次，衰减比铝秃减少4-7%。
2.在同等容量，为产品提升轻薄优势。
3.因应产品设计需求的差异、专用、高冲深、高值化需求

Ben Huang

1. To achieve the extended cycle life of 3C requirements, after 100 tests, the attenuation is 4-7% lower than that of aluminum bald.
2. At the same capacity, the product has the advantage of being light and thin.
3. In response to differences in product design requirements, special-purpose, high-drawing, and high-value requirements.

林詠翔

1.實現3C需求的延長迴圈壽命，經測試100次，衰減比鋁禿減少4-7%。                
2.在同等容量，為產品提升輕薄優勢。   
3.因應產品設計需求的差異、專用、高沖深、高值化需求

南亚塑胶工业有限公司铝塑膜南通厂自2018年规划建厂，2019年建置1000级无尘间完全遵照无尘环境管理作业标准，2021年开始生产，铝塑膜工厂引进高阶精密涂布设备、误差值达正负1微米可承制各种规格要求的铝塑膜产品全机标准配置自动光学检查系统管制各项产品品质并将每次运作设备之生产、侦测、调整等数据建立至云端数据储存管理系统，并增列优化系统RTPMS、MES等一体化系统透过网路将生产厂、工安环保监测、品质、保养系统等数据集中收集至单一的即时数据库内提供生产管理的重要资讯，加上云端网络商城、经营式销售与经营式研发的整合为高质化铝塑膜商品。 

　　公司总裁要求全企业秉承“安全环保与工业发展并重，确保产品绿色安全，员工、包商、厂区、社会安全是企业社会责任，更是企业竞争力的一部分”，企业多年来以先进的管理经验，引进PSM制程安全管理方法，先后通过ISO9000品质管制体系认证、ISO14001/OHSAS18001环境、职业健康与安全管理体系认证，连年被评为「安全生产先进单位」「绿色企业」，并先后荣获「花园式工厂」、「十一五节能示范企业」。

南通厂-中国

常見問題

差异分析

用途与施工

规格与规范

3C用鋁塑膜應用

Nanya Plastics Industry Co., Ltd. Nantong Factory of Aluminum Plastic Film has been planning to build a factory since 2018. In 2019, the construction of a 1000-level clean room completely complies with the dust-free environment management operating standards.
Production will begin in 2021. The aluminum-plastic film factory has introduced high-end precision coating equipment, with an error value of plus or minus 1 micron, which can produce all kinds of aluminum-plastic film products of various specifications. The standard configuration automatic optical inspection system controls the quality of various products and establishes the production, detection, adjustment and other data of each operating equipment to the cloud data storage management system, and adds an optimization system Integrated systems such as RTPMS and MES centrally collect data from production plants, industrial safety and environmental protection monitoring, quality, and maintenance systems into a single real-time database to provide important information for production management through the Internet. The integration of business sales and business research and development is a high-quality aluminum-plastic film product. 

 The president of the company requires the entire enterprise to adhere to the principle of "paying equal attention to safety and environmental protection and industrial development to ensure green and safe products. The safety of employees, contractors, factories and society is a corporate social responsibility and a part of corporate competitiveness." The management experience of the company, the introduction of the PSM process safety management method, has successively passed the ISO9000 quality control system certification, ISO14001/OHSAS18001 environmental, occupational health and safety management system certification, and has been awarded the Rated as "Safe Production Advanced Unit" and "Green Enterprise", and successively won the "Garden Factory" and "Eleventh Five-Year Energy Saving Demonstration Enterprise".

Nantong Factory-China

Frequently asked questions.

variation analysis

Use and processing

Specifications and standard.

南亞塑膠工業有限公司鋁塑膜南通廠自2018年規劃建廠，2019年建置1000級無塵間完全遵照無塵環境管理作業標準，
2021年開始生產，鋁塑膜工廠引進高階精密塗佈設備、誤差值達正負1微米可承製各種規格要求的鋁塑膜產品全機標準配置自動光學檢查系統管制各項產品品質並將每次運作設備之生產、偵測、調整等數據建立至雲端數據儲存管理系統，並增列優化系統RTPMS、MES等一體化系統透過網路將生產廠、工安環保監測、品質、保養系統等數據集中收集至單一的即時數據庫內提供生產管理的重要資訊，加上雲端網絡商城、經營式銷售與經營式研發的整合為高質化鋁塑膜商品。

　　公司總裁要求全企業秉承“安全環保與工業發展並重，確保產品綠色安全，員工、包商、廠區、社會安全是企業社會責任，更是企業競爭力的一部分”，企業多年來以先進的管理經驗，引進PSM制程安全管理方法，先後通過ISO9000品質管制體系認證、ISO14001/OHSAS18001環境、職業健康與安全管理體系認證，連年被評為「安全生產先進單位」「綠色企業」，並先後榮獲「花園式工廠」、「十一五節能示範企業」。