FM埋地消防PE管应用实绩

苏贞昌

比重0.95-0.97，材质较PVC管为轻。

耐寒(-40°C)、耐震(6级)、断裂伸长率350 ∼ 1,000%( 约不锈钢6~16.6 倍)。

使用优质HDPE原料，韧性佳、耐腐蚀，可取代金属管用于消防管。

经公立大学测试寿命可达97年。

通过FM1613高标准水压试验。

FM埋地消防PE管证书

Applications of FM PE Pipe for Underground Fire Protection

Curtis Chao


Nan Ya FM approved PE Pipe lighter than PVC pipe with specific gravity between 0.95 and 0.97

Cold resistance (-40°C) , seismic resistance (magnitude of six) and elongation at break between 350% and 1,000% (6 to 16.6 times higher than stainless steel).

Replacing metal pipe with HDPE pipe for fire fighting purpose,  it offers good toughness and corrosion resistance.

Durability of 97 years tested by public university.

Passed the hydrostatic test in compliance with FM1613 strict standards.       





Certificate of FM PE Pipe for Underground Fire Protection

六輕FM埋地消防PE管路

FM埋地消防PE管吊裝

FM埋地消防PE管施工

FM埋地消防PE管連接作業

FM埋地消防PE管電焊套施工

FM埋地消防PE管電焊套熔接

FM埋地消防PE管應用實績

趙榮村

比重0.95-0.97，材質較PVC管為輕。

耐寒(-40°C)、耐震(6級)、斷裂伸長率350 ∼ 1,000%( 約不銹鋼6~16.6 倍)。

使用優質HDPE原料，韌性佳、耐腐蝕，可取代金屬管用於消防管。

經公立大學測試壽命可達97年。

通過FM1613高標準水壓試驗。

FM埋地消防PE管認證證書

数位转型运作入门

南亚塑胶公司于1958年创立，同年于高雄市仁武区兴建完成南亚第一座PVC管材工厂。 
　　嘉义管材工厂于1980年5月兴建完成，经由明志厂及仁武一厂迁入押出机设备，产能逐步由5,500吨/月成长至今14,000吨/月，高居全国之冠，产品涵盖PVC-U塑胶管、HI耐冲击PVC-U塑胶管、耐热CPVC管、HDPE管等多项领域。 
　　工厂占地面积4.8公顷，员工近300人，所生产之「南亚牌」各型管材及接头，品质优良，规格齐全，为台湾管材制造之标竿，获经济部标准检验局最早颁发正字标记的荣誉，并通过ISO9001、ISO14001、ISO45001、ISO50001、TAF实验室认证及取得FM1613埋地消防PE管认证。 
　　为进一步优化品质及竞争力，持续开发高性能管材，以便引领管材再升级，经由进行数位转型经营、建置云端网络商城等作业，朝成为国际顶尖管材制造公司迈进。

嘉义一厂-FM管

南亚塑胶公司于1984年建立嘉义硬质板工厂，至今不断提升技术层次，并将各制程纳入自动化监控，同时透过资料分析及持续改善，以提高板材品质。 
　　硬质板产品用途广泛，从半导体、液晶显示器、印刷电路板、化学处理槽…等各种用途之设备，以及各种隔板、广告招牌、组合橱柜、装潢建材…等皆可使用；透明、不透明、发泡板、A-PET板、5呎板、耐热、耐燃…等各种等级，产品规格齐全，藉由智慧化生产技术，品质深获客户认同，长期使用性佳。 　　硬质板工厂月产能约2,700吨，除产量不断提升之外，并致力于配方与制程之改善，以及产品持续地研发与推陈出新，本厂陆续通过ISO9001、ISO14001以及ISO45001职业安全卫生管理系统之认证，2019年12月通过TAF国家实验室认证。 
　　目前南亚PVC硬质板制品业已通过无尘室用材料规范FM4910认证，此项规范为塑胶材料中最严格之防火要求，本公司同时亦积极开发其他各种符合FM4910之板材中，以供应半导体等产业之无尘室使用需求，并对无尘室之设备财产安全提供更佳的保障与服务。

嘉义四厂-FM板

管材製品-傳統與現代的整合 – 塑膠管.mp4

管材製品-智慧工廠.mp4

管材製品-品質管制.mp4

管材製品-TAF實驗室.mp4

管材製品-防偽認證.mp4

管材製品-數位化電子商務系統.mp4

常见问题

差异分析

用途与施工

规格与规范

FM埋地消防PE管--可应用场所

管材製品-FM埋地消防PE管及抗旱等應用實績.mp4

管材製品-各類管施工影片.mp4

Introduction to Digital Transformation

Nan Ya Plastics Corporation was founded in 1958 and in the same year the first PVC pipe factory was built in Renwu, Kaohsiung, Taiwan. 
　　 Chiayi Pipe Plant was established in May 1980. By moving the extruder equipment from Mingzhi Factory and Renwu Factory No. 1, the production capacity has increased gradually from 5,500 tons/month to 14,000 tons/month , which accounts for the highest capacity in local market. The products include PVC-U plastic pipe, HI impact resistant, heat-resistant CPVC pipe, and HDPE pipe. 
 The factory covers an area of 4.8 hectares and employs more than 300 people. The "Nan Ya " pipes and fittings with a very complete range of specifications are of the most high quality. As a benchmark for pipe manufacturing in Taiwan, Nan Ya was awarded with the honor of Taiwan national standard" CNS Mark" by the Bureau of Standards, Inspection and Quarantine of the Ministry of Economic Affairs as well as passing ISO9001, ISO14001, OHSAS18001, ISO50001, TOSHMS, the occupational safety and health management system certification, TAF laboratory certification and FM1613 underground fire protection PE pipe certification. 
 To optimize quality and competitiveness, we will continue to develop and upgrade the high-performance pipes. Through the implementation of digital transformation , Nan Ya is determined to move towards to becoming a top international pipe manufacturer.

Chiayi No. 1 Plant-FM PIPE

Nan Ya Plastic Co. established Chiayi Rigid Board Factory in 1984, and has continuously improved its technical level, and has incorporated various processes into automatic monitoring. At the same time, through data analysis and continuous Improvements to improve sheet quality. 
 Rigid board products are widely used, ranging from semiconductors, liquid crystal displays, printed circuit boards, chemical treatment tanks, etc. equipment, as well as various partitions, advertising signs, cabinets, decorative building materials...etc. Transparent, opaque, foam board, A-PET board, 5-foot board, heat-resistant, flame-resistant...and other grades, the product specifications are complete, through intelligent production technology, quality It is deeply recognized by customers and has good long-term usability. The rigid board factorymonthly production capacity is about 2,700 tons. In addition to the continuous increase in output, it is also committed to the improvement of formula and process, as well as continuous product development and innovation. , the factory has successively passed the certification of ISO9001, ISO14001 and ISO45001 occupational safety and health management system, and in December 2019 passed the TAF National Laboratory Certification. 
 At present Nanya's PVC rigid board products have passed the FM4910 certification for clean room materials, which is the most stringent fire protection requirement in plastic materials. At the same time, it is also actively developing other kinds of FM4910-compliant sheets to meet the needs of clean room use in semiconductor and other industries, and to provide better protection and services for the safety of equipment and property in clean rooms.

Chiayi No. 4 Plant-FM Plate

Digital E-commerce System

Common Questions 

Difference Analysis

Applications and Construction

Specifications and Standards

Applicable places

數位轉型運作入門

南亞塑膠公司於1958年創立，同年於高雄市仁武區興建完成南亞第一座PVC管材工廠。
　　嘉義管材工廠於1980年5月興建完成，經由明志廠及仁武一廠遷入押出機設備，產能逐步由5,500噸/月成長至今14,000噸/月，高居全國之冠，產品涵蓋PVC-U塑膠管、HI耐衝擊PVC-U塑膠管、耐熱CPVC管、HDPE管FM埋地消防PE管、美規UL651(高溫用)電線導管等多項領域。
　　工廠佔地面積4.8公頃，員工近300人，所生產之「南亞牌」各型管材及接頭，品質優良，規格齊全，為台灣管材製造之標竿，獲經濟部標準檢驗局最早頒發正字標記的榮譽，並通過ISO9001、ISO14001、ISO45001、ISO50001、TAF實驗室認證及取得FM1613埋地消防PE管認證與美規UL651(高溫用)電線導管認證。
　　為進一步優化品質及競爭力，持續開發高性能管材，以便引領管材再升級，經由進行數位轉型經營、建置雲端網絡商城等作業，朝成為國際頂尖管材製造公司邁進。

嘉義一廠(FM管)

南亞塑膠公司於1984年建立嘉義硬質板工廠，至今不斷提升技術層次，並將各製程納入自動化監控，同時透過資料分析及持續改善，以提高板材品質。
　　硬質板產品用途廣泛，從半導體、液晶顯示器、印刷電路板、化學處理槽…等各種用途之設備，以及各種隔板、廣告招牌、組合櫥櫃、裝潢建材…等皆可使用；透明、不透明、發泡板、A-PET板、5呎板、耐熱、耐燃…等各種等級，產品規格齊全，藉由智慧化生產技術，品質深獲客戶認同，長期使用性佳。
　　硬質板工廠月產能約2,700噸，除產量不斷提升之外，並致力於配方與製程之改善，以及產品持續地研發與推陳出新，本廠陸續通過ISO9001、ISO14001以及ISO45001職業安全衛生管理系統之認證，2019年12月通過TAF國家實驗室認證。
　　目前南亞PVC硬質板製品業已通過無塵室用材料規範FM4910認證，此項規範為塑膠材料中最嚴格之防火要求，本公司同時亦積極開發其他各種符合FM4910之板材中，以供應半導體等產業之無塵室使用需求，並對無塵室之設備財產安全提供更佳的保障與服務。