江坤翰 Ken Chiang（内销）

王承丰 Curtis Wang（外销）

386E为低熔点，慢结晶之半结晶型共聚酯固态聚合粒，特性黏度0.86dl/g。

可使用熔融押出薄膜直接贴合铁片或铝片，或先制成薄膜再与加热后之铁片或铝片挤压贴合；制成的覆膜铝或覆膜铁片再经过延伸制罐制成食品饮料包装用的金属罐。

以386E聚酯粒制成的薄膜与金属的黏合力强，且经过后续的延伸制罐及高温杀菌的制程，不会发生拨离脱落或破膜等现象。

386E聚酯粒系以独特的连续聚合技术生产,结合严格的品管流程,获得ISO9002、 ISO14001及OHSAS18001等系统认证,产品品质优异且稳定。

386E聚酯粒符合美国食品药物管理法177.1630、欧盟REACH高关度物质及ROHS等法规标准,可广泛应用于包装食物及化妆品等内容物。

详细内容请点击下方产品网站。

Ken Chiang （Domestic Sales Service）

Curtis Wang （International Sales Service）

Tairilin 386E is a semi-crystalline copolymeric resin with a nominal intrinsic viscosity of 0.86dl/g.  

Tairilin 386E resin is especially designed to have low melting point, higher melt strength, slow crystallization rate and low oligomer, which is especially suitable for direct extrusion coating/lamination process with high adhesion onto steel or aluminum sheet.

Tairilin 386E is synthesized by antimony_free catalyst in melt state polycondensation (MSP) and then goes through solid state polycondensation(SSP).

Tairilin 386E resin is produced in a state of the art continuous MPP process and then in continuous SSP process, which these processes are combined with a strict quality monotoring system.

In these continuous processes, polymer goes through several fine filtration system to ensure the cleanse of the resin. 

These production facilities are approved by ISO9001, ISO14001 and OHSAS 18001 systems to confirm the outstanding quality.

Tairilin 386E resin conforms to FDA Regulation 177.1630, and is an environmental friendly product.

For detailed information, please click on the product website below.

江坤翰 Ken Chiang（內銷）

王承豐 Curtis Wang（外銷）

386E為低熔點，慢結晶之半結晶型共聚酯固態聚合粒，特性黏度0.86dl/g。

可使用熔融押出薄膜直接貼合鐵片或鋁片，或先製成薄膜再與加熱後之鐵片或鋁片擠壓貼合；製成的覆膜鋁或覆膜鐵片再經過延伸製罐製成食品飲料包裝用的金屬罐。

以386E聚酯粒製成的薄膜與金屬的黏合力強，且經過後續的延伸製罐及高溫殺菌的製程，不會發生撥離脫落或破膜等現象。

386E聚酯粒係以獨特的連續聚合技術生產,結合嚴格的品管流程,獲得ISO9002、 ISO14001及OHSAS18001等系統認證,產品品質優異且穩定。

386E聚酯粒符合美國食品藥物管理法177.1630、歐盟REACH高關度物質及ROHS等法規標準,可廣泛應用於包裝食物及化妝品等內容物。

詳細內容請點選下方產品網站。

南亚塑胶工业股份有限公司，于 1958 年成立于台湾，主要从事 PVC 管、胶皮、胶布等塑胶二次加工的生产，历经多年的努力，组织得以不断扩充、成长及茁壮的动力来源，就是二位创办人王永庆先生与王永在先生一再强调、并且身体力行的「勤劳朴实、止于至善、永续经营、奉献社会」精神。
纤维事业部于民国56年在泰山厂成立，之后陆续扩建林口厂以及工三厂，民国79年开始到海外设厂，目前在美国、越南及大陆昆山厂，共有三个海外厂区，聚酯膜厂在民国105年独立成为聚酯膜事业部，目前在工三、林口及树林各有一个生产厂，与纤维部共组为聚酯产品事业部。

台北市/台湾

美国南亚塑胶股份有限公司（“NPCA”）在美国特拉华州注册成立的公司，也是台湾南亚塑胶股份有限公司（“NPC-Taiwan”）全资子公司，于1989年在其母公司的愿景战略下，进行全球扩张，以满足对合成纤维、化学和塑料相关产品不断增长的需求。

同时成功营运位于美国三个不同地点的制造工厂，主要产品如下：
1.软性PVC薄膜（Batchelor Plant, Louisiana）
2.聚酯纤维（Lake City Plant, South Carolina）
3.乙二醇（EG）（Point Comfort Plant, Texas）

为了在美国市场发挥重要作用，并保持强大的竞争者地位，NPCA自营运开始以来，就致力于提供具有竞争力价格的优质产品。为实现这一目标，公司投资了最先进的制造机械/设备，并不断进行研发，以确保产品的最高质量，同时通过具有成本效益的管理理念有效降低成本。坚持不懈的努力赢得了回报，NPCA在美国成立仅几年时间，就已成为合成纤维、化学和塑料行业的领导者之一。

南卡罗来纳州/美国

台塑工业股份有限公司（FIC）成立于2001年，隶属于台湾台塑集团，越南PVC包装厂，是台湾南亚塑胶股份有限公司于1958年开始投资，现已成为塑料、纤维和电子行业多项业务的全球领导者，南亚于1975年开始生产PVC保鲜膜且深受市场欢迎，目前南亚保鲜膜广泛应用于食品包装、小件单品和卷状物品。

同奈 /越南

南亚塑胶工业股份有限公司，于1958 年成立于台湾，主要从事PVC 管、胶皮、胶布等塑胶二次加工的生产，历经多年的努力，组织得以不断扩充、成长及茁壮的动力来源，就是二位创办人王永庆先生与王永在先生一再强调、并且身体力行的「勤劳朴实、止于至善、永续经营、奉献社会」精神。
本公司为因应客户在价格、交期、研发及售后服务等各方面之要求，自1994年前往大陆广州、惠州、厦门及南通等地，设立各种塑胶产品之二次加工厂，2000年以后再于昆山地区设立印刷电路板等，一系列的电子材料产品垂直整合工厂，以及建造聚酯纤维制品上、中、下游一贯生产体系的工厂，就近服务众多的三次加工客户。

昆山 /中国

聚酯粒联络资讯

Nan Ya Plastic Industry Co., Ltd. was established in Taiwan in 1958. It is mainly engaged in the production of secondary processing of plastics such as PVC pipes, rubber sheets, and tapes. After years of hard work, the organization can continue to expand, grow and thrive. The founders Mr. Wang Yongqing and Mr. Wang Yongzai have repeatedly emphasized and practiced the spirit of "diligence and simplicity, perfection, sustainable management, and dedication to society".
The Fiber Division was established in the Taishan factory in 1956, and then successively expanded the Linkou factory and the No. The factory became an independent polyester film business department in 2005, and currently has a production plant in Gongsan, Linkou, and Shulin, which together with the fiber department form the polyester product business department.

Taipei City/Taiwan

Nan Ya Plastics Corporation, America ("NPCA"), a Delaware-incorporated company and a wholly-owned subsidiary of Nan Ya Plastics Corporation, Taiwan ("NPC-Taiwan"), was founded in 1989 under the strategy of its parent company's vision for global expansion to meet the ever-increasing demand for synthetic fiber, chemical, and plastics related products.

The South Carolina plant began with Phase I in 1990. When construction finished, the plant produced several polyester (PET) products, including PET resin, POY filament, and staple fiber. Phase II was completed in 1995, adding bottle and packaging grade PET resin to the plant’s production capabilities.
 
With the success of the previous two phases, capital projects (Phase III & Phase IV) were initiated in 1995 to increase the total production capacity. By 1999, the South Carolina plant had more than doubled its capacity and introduced two new products, HOY and FDY filament. By 2000, the final expansion (Phase V) was complete, further increasing the plant’s bottle and packaging resin capacity to its present size. In 2002, modifications were completed allowing the production of Conjugate Fiber and Low Melt Fiber.

The plant is ISO 9001: 2015 certified for all products and is GMP (Good Manufacturing Practices) certified for our Packaging Grade Resin. Our dedicated employees strive to provide excellent products and services to our customers since 1990. Production lines are run around the clock with an overall production rate of approximately 2 billion pounds of polyester polymer per year.

State of South Carolina/America

Formosa Plastics Industrial Co., Ltd. (FIC) was established in 2001. It is affiliated to Taiwan Formosa Plastics Group and Vietnam PVC packaging factory. It is one of the Nanya plastic factories under Formosa Plastics Group. Taiwan Nanya Plastics Co., Ltd. It has become a global leader in multiple businesses in the plastics, fiber and electronics industries. Nanya began to produce PVC cling film in 1975 and has been very popular in the market. At present, Nanya cling film is widely used in food packaging, small items and rolls.

Dong Nai /Vietnam

Nan Ya Plastics Corporation was founded in Taiwan in 1958, specializing in the production of secondary processed plastic products such as PVC pipes, rubber products, and adhesive tapes. After years of effort, the company has continued to expand, grow, and flourish thanks to the spirit of "hard work, simplicity, pursuit of excellence, sustainable management, and dedication to society" emphasized and embodied by its two founders, Mr. Yung-Ching Wang and Mr. Yung-Tsai Wang.

In response to customer demands for pricing, delivery, research and development, and after-sales service, the company established various secondary processing plants for plastic products in Guangzhou, Huizhou, Xiamen, Nantong, and other areas in China in 1994. After 2000, the company also established a vertically integrated plant for electronic materials, such as printed circuit boards, in the Kunshan region. Additionally, it built a comprehensive production system for polyester fiber products in upstream, midstream, and downstream factories, serving its many tertiary processing customers.

Kunshan /China

PET Resin Contact Information

南亞塑膠工業股份有限公司，於 1958 年成立於臺灣，主要從事 PVC 管、膠皮、膠布等塑膠二次加工的生產，歷經多年的努力，組織得以不斷擴充、成長及茁壯的動力來源，就是二位創辦人王永慶先生與王永在先生一再強調、並且身體力行的「勤勞樸實、止於至善、永續經營、奉獻社會」精神。
　　纖維事業部於民國56年在泰山廠成立，之後陸續擴建林口廠以及工三廠，民國79年開始到海外設廠，目前在美國、越南及大陸昆山廠，共有三個海外廠區，聚酯膜廠在民國105年獨立成為聚酯膜事業部，目前在工三、林口及樹林各有一個生產廠，與纖維部共組為聚酯產品事業部。

台北市/台灣

美國南亞塑膠股份有限公司（“NPCA”）在美國特拉華州註冊成立的公司，也是台灣南亞塑膠股份有限公司（“NPC-Taiwan”）全資子公司，於1989年在其母公司的願景戰略下，進行全球擴張，以滿足對合成纖維、化學和塑料相關產品不斷增長的需求。

同時成功營運位於美國三個不同地點的製造工廠，主要產品如下：
1.軟性PVC薄膜（Batchelor Plant, Louisiana）
2.聚酯纖維（Lake City Plant, South Carolina）
3.乙二醇（EG）（Point Comfort Plant, Texas）

　　為了在美國市場發揮重要作用，並保持強大的競爭者地位，NPCA自營運開始以來，就致力於提供具有競爭力價格的優質產品。為實現這一目標，公司投資了最先進的製造機械/設備，並不斷進行研發，以確保產品的最高質量，同時通過具有成本效益的管理理念有效降低成本。堅持不懈的努力贏得了回報，NPCA在美國成立僅幾年時間，就已成為合成纖維、化學和塑料行業的領導者之一。

南卡羅來納州/美國

　　台塑工業股份有限公司（FIC）成立於2001年，隸屬於台灣台塑集團，越南PVC包裝廠，是台灣南亞塑膠股份有限公司於1958年開始投資，現已成為塑料、纖維和電子行業多項業務的全球領導者，南亞於1975年開始生產PVC保鮮膜且深受市場歡迎，目前南亞保鮮膜廣泛應用於食品包裝、小件單品和卷狀物品。

南亞塑膠工業股份有限公司，於1958 年成立於臺灣，主要從事 PVC 管、膠皮、膠布等塑膠二次加工的生產，歷經多年的努力，組織得以不斷擴充、成長及茁壯的動力來源，就是二位創辦人王永慶先生與王永在先生一再強調、並且身體力行的「勤勞樸實、止於至善、永續經營、奉獻社會」精神。
本公司為因應客戶在價格、交期、研發及售後服務等各方面之要求，自1994年前往大陸廣州、惠州、廈門及南通等地，設立各種塑膠產品之二次加工廠，2000年以後再於昆山地區設立印刷電路板等，一系列的電子材料產品垂直整合工廠，以及建造聚酯纖維製品上、中、下游一貫生產體系的工廠，就近服務眾多的三次加工客戶。

Visionary Organizations

Related Organizations

Construction Products

Packaging Materials

Medical Materials

Industrial Products

Automotive Products

Print Advertising

Composite Chemicals

Leisure Life

Optical Materials

Electronic Materials